Yarbo Lawn Mower Pro + Snow Blower + Blower Bundle | Core + 3 Modules

The Yarbo Lawn Mower Pro + Snow Blower + Blower bundle is the complete all-season system: a Yarbo Core with all three Y Series modules, plus the full Docking Station, Data Center, battery, charger, tool kit, tow hitch, and both blade sets. The same tracked robot mows up to 6 acres in summer, stacks leaves and sweeps debris in autumn, and clears the driveway as snow falls in winter, on one map with one app.

Lawn Mower Pro Module. Dual 300 W cutting motors with 2,500 W of peak power (twice Yarbo's standard mower module) across a 20-inch cutting width, with both cutting discs and SK85 straight blades included, a 0.8 to 4.0 inch cutting range, 120 minutes of mowing per charge, about 1.7 acres per day, and a 6-acre maximum mowing size. Binocular cameras, ultrasonic sensors, and a bumper handle object detection, and the complete mower is IPX6 rated.

Snow Blower Module. A two-stage unit with a 24-inch clearing width, a 12-inch intake height, a 6 to 40 foot throw, and a chute that rotates from -10 to 190 degrees. It is rated for dry, wet, and packed snow on paved, concrete, and gravel, clears about 6,000 square feet per charge in 1 inch of snow, runs 90 minutes per charge, and starts working when snowfall begins. Yarbo lists Snow Blower Module deliveries as beginning in September 2026, and orders that include it ship as Yarbo releases stock.

Blower Module. 21 N of blowing force, 174 mph of air velocity, and 607 CFM of air volume for 70 minutes per charge. Smart route planning stacks leaves into piles, and Yarbo rates it for driveway cleaning, yard waste piling, post-project cleanup, and light snow up to 2 inches of fresh, dry powder.

Yarbo Core platform. Every bundle is built on the same tracked Core: dual drive motors on rubber tracks, slopes up to 70 percent (35 degrees) with the mower or blower fitted, a 500-pound tow hitch, RTK-GPS positioning from the included Data Center base station (or NetRTK with no base station), binocular cameras, an IMU, and odometry for navigation, and a removable 36 V 38.4 Ah battery that recharges wirelessly on the Docking Station from 20 to 80 percent in about 90 minutes. Modules swap without tools, and one map and one set of schedules serve every task.

• One Robot, Every Task: Swap modules in minutes; the Core, dock, base station, battery, and map are shared across everything you attach.
• 2,500 W Peak Mowing: Dual 300 W motors, two blade systems, a 20-inch cut, and up to 6 acres of mowing capacity on 70 percent slopes.
• 0.8 to 4.0 in Cutting Height: Handles dense warm-season turf as well as cool-season lawns.
• Two-Stage Snow Clearing: 24-inch width, 12-inch intake, 6 to 40 foot throw, and automatic starts when snowfall begins.
• Fits Real Driveways: Gravel skimming, Spiral Mode for circular layouts, and per-zone depth and schedules.
• 21 N Leaf Blowing: 174 mph and 607 CFM that stack leaves into piles and clear debris, pollen, and light snow.
• RTK Plus Vision Navigation: Centimeter positioning from the Data Center or NetRTK, with cameras and a bumper for obstacle detection and rain detection for bad weather.
• Wireless Auto-Recharge: The robot docks itself at low battery and resumes where it stopped.
• App Control and Teleoperation: Schedules, zone mapping, alerts, live view, and remote control from the Yarbo app.

This is the bundle for properties with all four seasons of work: acreage to mow, trees that drop leaves, and a driveway that needs clearing before the morning commute. Buying the three modules together on one Core costs less than assembling the system piece by piece, and every task shares the same map, dock, base station, and battery.

Within the Yarbo lineup, the two-module bundles (Lawn Mower Pro + Snow Blower, Lawn Mower Pro + Blower, and Snow Blower + Blower) cover properties that only need two of the three tasks; any module can be added later.

1. Site the dock and base station: Place the Docking Station on level ground with access to power, and install the Data Center on its mounting pole in an open spot with a clear view of the sky so its RTK base station holds a strong satellite fix. If you use NetRTK instead, there is no base station to site: power on and connect to your local network from the app.
2. Install and charge the battery: Seat the removable Y Series battery and charge it on the dock or with the wired charger. A 20 to 80 percent charge takes about 90 minutes.
3. Set up the Yarbo app: Download the Yarbo app for iOS or Android, create an account, link the Core, and assign your Wi-Fi. Firmware for the robot and Data Center updates from the app.
4. Attach the module for the season: Each module mounts to the Core without tools and appears in the Yarbo app with its own task types. For mowing, fit the cutting discs or straight blades and set the cutting height. For snow, set throw distance, chute direction, and intake height per zone. For blowing, set airflow direction, travel speed, and air velocity per work plan.
5. Map the property: Draw your working areas, pathways, sidewalks, and no-go zones in the app. Mapping is a one-time job; edits later are software changes, not hardware changes.
6. Create a work plan and schedule: Build a work plan for each area, set the schedule, and let Yarbo run it: the robot docks itself to recharge and resumes where it stopped.
7. Use Yarbo's installation support: Yarbo offers a volunteer installer map and one-on-one video instruction with a Yarbo technician if you want guided help with first setup.