TerraMow V1000 Robot Lawn Mower

The TerraMow V1000 is a smart robotic lawn mower that cuts your grass for you, with no wires and no setup hassle. Instead of a buried boundary wire or a satellite antenna, it uses the TerraVision 2.0 triple-camera AI vision system to see your yard. It maps and mows your lawn on its own, and it works on lawns up to about 1,200 square meters, or roughly 0.3 acre.

Because it uses cameras and AI instead of RTK or GPS, there are no signal problems, even in shaded areas under trees. With one click, the V1000 maps your lawn, learns the boundaries, and starts mowing. It cuts in neat, straight lines and gets close to the edges, and it even backs into corners to finish them.

The V1000 uses a three-blade cutting disc with sharp SK5 high-carbon blades, and you can set the cutting height from 25 to 75 mm in the app. It is IPX6 waterproof, has a rain sensor, and returns to its base to recharge, then picks up right where it left off. It is also very quiet, under 54 decibels.

• Pure AI Vision, No Wires: The TerraVision 2.0 triple-camera system maps and mows your lawn with no boundary wire, no RTK antenna, and no GPS.
• No Signal Problems: Because it uses cameras, it works well in shaded spots and complex yards where satellite mowers struggle.
• One-Click Auto-Mapping: Set up in minutes. With one tap, it learns your lawn and starts mowing.
• 3D Obstacle Avoidance: It spots and avoids trees, furniture, pools, pets, and small wildlife.
• Very Quiet: It mows at under 54 decibels, so it will not disturb your family or neighbors.
• Smart and Up to Date: Control it from the app, watch a live camera feed, and get free over-the-air updates.

The V1000 is made for medium and larger home lawns up to about 0.3 acre. Because it needs no wire and no antenna, it is a great fit for complex yards with trees, planting beds, narrow paths, and odd shapes. It maps the whole lawn and cuts close to the edges.

It works best on lawns that are fairly flat, and it can handle slopes up to 18 degrees. Its compact size lets it fit through narrow passages, and its rain sensor and weather-aware settings let you decide how it acts in wet weather. Once it is set up, it keeps your lawn neat on its own.

1. Set up the base: Place the base station on flat, open ground and mount it with the included screws.
2. Plug it in: Connect the power adapter to the base station.
3. Charge the mower: Put the V1000 on the base station and let it charge.
4. Connect the app: Download the TerraMow app, then connect the mower over Wi-Fi or 4G.
5. Map your lawn: Use one-click auto-mapping to let the mower learn your lawn and its boundaries.
6. Start mowing: Set your cutting height, zones, edge cutting, and schedule, then let the V1000 mow on its own.