Roborock Saros Z70 Robot Vacuum with OmniGrip™ Mechanical Arm

The Saros Z70 is the first mass-produced robot vacuum with a foldable five-axis mechanical arm. During a run, the OmniGrip arm can pick up items weighing up to 300 grams - socks, sandals, crumpled tissues, small towels - move them to a drop-off spot you set in the Roborock app, and then clean the floor they were covering. Everything rides in an ultra-slim 7.98 cm (3.14 inch) body that slips under couches and beds most robots cannot reach.

Underneath the arm is Roborock's most capable cleaning platform: 22,000 Pa of HyperForce suction, a dual anti-tangle brush system, and a mop that washes in 176 F (80 C) hot water back at the dock. The StarSight Autonomous System 2.0 handles navigation with 3D sensing that recognizes 108 obstacle types out of the box, plus up to 50 custom objects you teach it, while the AdaptiLift chassis climbs double-layer thresholds up to 4 cm (1.57 inches).

The Saros Z70 sits at the very top of the Roborock lineup. It is built for households that want the floor actually cleared, not just cleaned around - busy family homes, pet households, and anyone who wants to see where robot vacuums are headed next.

• OmniGrip Mechanical Arm: A foldable five-axis arm with a built-in weight sensor picks up items up to 300 g - socks, sandals, crumpled tissues, small towels - and carries them to drop-off spots you define in the app, then cleans the area they were blocking. An emergency stop button, pressure switch, anti-pinch sensors, and collision sensing keep hands and paws safe.
• 22,000 Pa HyperForce Suction: Roborock's strongest suction class pulls fine dust and pet hair from carpet pile and hard-floor gaps, with dual all-rubber brushes and a dual anti-tangle system that keeps long hair off the rollers.
• StarSight Autonomous System 2.0: 3D sensing with 21x the sampling frequency of a spinning LDS tower recognizes 108 obstacle types, accepts up to 50 custom objects you teach it, and adds VertiBeam lateral sensing for cables and wall edges.
• AdaptiLift Chassis: Independent three-wheel control lifts the chassis 10 mm to cross double-layer thresholds up to 4 cm (1.57 inches), so multi-room homes with transition strips stay on one cleaning run.
• Ultra-Slim 3.14 Inch Body: At 7.98 cm tall, the Saros Z70 cleans under sofas, beds, and consoles that block conventional robots - no LiDAR tower on top.
• Hands-Off Dock: The multifunctional dock washes mops in 176 F (80 C) hot water with a 99.99 percent bacteria removal rate, dries them with 131 F (55 C) warm air, holds up to 60 days of dust, dispenses detergent from a 590 ml reservoir, and refills the robot with warm water.
• Edge-to-Edge Reach: FlexiArm Riser technology extends the side brush and mop into corners and along baseboards for full edge coverage.
• Voice and App Control: The built-in "Hello Rocky" assistant works without a network, SmartPlan 2.0 tunes settings automatically, and dual-angle remote viewing with pet snapshots lets you check on the house from anywhere.

The Saros Z70 is built for real households rather than showroom floors: family homes where socks and small toys land everywhere, pet households that shed daily, and larger multi-room layouts with mixed hardwood, tile, and carpet. The 3.14 inch profile reaches under low furniture, the 4 cm threshold crossing handles doorway transitions and layered rugs, and hot water mop washing keeps the mopping side hygienic without you touching a dirty pad.

Within the Roborock lineup, the Saros Z70 is the flagship for clutter-prone homes because of the OmniGrip arm. If you want the same slim StarSight navigation platform without the arm, look at the Saros 10R, or consider the Saros 10 if you prefer a retractable-LiDAR flagship focused purely on cleaning power.

1. Unbox and remove protectors: Take off all protective films and foam blocks from the robot, the OmniGrip arm bay, and the dock components.
2. Place the dock: Set it on a hard, level floor against a wall near a power outlet, leaving open floor in front and clear space on both sides so the robot can dock straight.
3. Fill and load: Fill the clean water tank, add Roborock cleaning solution to the 590 ml detergent reservoir, and confirm the dust bag is seated.
4. Charge: Dock the robot and let it charge fully; a fast charge takes about 2.5 hours.
5. Pair in the Roborock app: Download the Roborock app, create an account, and follow the pairing flow over your home Wi-Fi.
6. Run the first mapping cycle: Start a quick mapping run so StarSight 2.0 can build the floor plan before the first full clean.
7. Configure the arm and rules: Set pickup preferences and drop-off locations for the OmniGrip arm, then add schedules, no-go zones, and room-by-room cleaning settings.