Roborock S7 Max Ultra Robot Vacuum with RockDock® Ultra

The Roborock S7 Max Ultra is a complete hands-free floor care system: a 5,500 Pa HyperForce robot vacuum and sonic mop paired with the RockDock Ultra, an all-in-one dock that washes the mop, empties the dustbin, refills the water tank, dries the mop, and cleans its own base. Between dust bag changes - up to 7 weeks apart - your involvement is essentially zero.

Mopping is where the S7 line made its name: the VibraRise system scrubs floors sonically at 3,000 times per minute and removes dried stains about 30 percent more effectively than standard robot mops, then lifts the mop 5 mm when carpet is detected. PreciSense LiDAR handles mapping while Reactive Tech obstacle avoidance spots objects in the robot's path and suggests No-Go Zones around trouble spots.

In the Roborock range, the S7 Max Ultra is the proven-generation Ultra: full dock automation with tank-based water handling (no plumbing required), priced below the newer S8 Ultra models. The 5200 mAh battery runs up to 180 minutes, charges 30 percent faster than its predecessors, and supports off-peak charging.

• RockDock Ultra Automation: Washes the mop, empties the dustbin, refills the water tank, dries the mop, and cleans its own base - the full maintenance loop handled at the dock, no plumbing needed.
• 5,500 Pa HyperForce Suction: Strong airflow clears grit from hard floors and pulls debris up out of carpet pile on every pass.
• VibraRise Sonic Mopping: 3,000 scrubs per minute attack dried, stuck-on stains about 30 percent more effectively than traditional robot mops, with a mopping range up to 3,230 sqft thanks to automatic refills.
• Mop Lifting for Carpet: The mop rises 5 mm when carpet is detected, so the robot can vacuum rugs mid-route without dragging a wet pad across them.
• 7-Week Dust Capacity: The dock's 2.5 L dust bag swallows weeks of auto-emptied debris before it needs changing.
• PreciSense LiDAR + Reactive Tech: Accurate mapping and object detection keep routes tight, and the app suggests No-Go Zones around stairs and snag-prone spots.
• Smarter Charging: 30 percent faster charging shortens mid-clean pit stops, and off-peak charging shifts energy use to cheaper hours.

The S7 Max Ultra fits homes that want full dock automation without touching their plumbing: renters, condos, and houses where the dock may move rooms. Its sonic mop earns its keep in kitchens and entryways with dried spills and tracked-in grime, while the 5 mm mop lift and 5,500 Pa suction handle homes that mix hard floors with area rugs and low-pile carpet. Pet households benefit from the 7-week self-emptying cycle and daily scheduled runs that keep hair from accumulating.

Within the Roborock lineup, the newer Roborock S8 Max Ultra with 8-in-1 RockDock Ultra adds a dual-roller brush, stronger suction, and hot water mop washing, and the flagship Roborock S8 MaxV Ultra with Refill & Drainage System goes further with camera-based AI avoidance and a plumbed-in dock.

1. Unbox and prep: Remove all protective films and foam from the robot and dock, and attach the VibraWash mop cloth to its mount.
2. Place the RockDock Ultra: Set the dock against a wall on a hard, level surface with open space in front and to the sides for the robot's approach. No plumbing is required - just a power outlet.
3. Fill and charge: Fill the dock's clean water tank, dock the robot, and let the 5200 mAh battery charge fully before the first run.
4. Pair in the Roborock app: Download the Roborock app and follow the prompts to connect the robot to your home Wi-Fi.
5. Run the first mapping cycle: Let a full clean finish so PreciSense LiDAR can build the map, then name rooms and review the suggested No-Go Zones.
6. Automate it: Set cleaning schedules, mop wash intervals, and off-peak charging hours, then let the dock handle the day-to-day.