Roborock QV 35S Robot Vacuum with Multifunctional Dock

The QV 35S pairs a 10,000 Pa robot vacuum and mop with a full multifunctional dock, so the routine maintenance that usually falls to you - emptying the bin, washing the mop pads, drying them, refilling the water tank - happens automatically between runs. Two spinning mops scrub at up to 200 RPM, and the dock self-cleans them with hot water and air-dries them so they do not sit damp and sour.

Navigation runs on PreciSense LiDAR with 360-degree scanning and multi-floor mapping for up to 4 levels, while Reactive Tech structured-light sensing steers the robot around shoes, bowls, and cords in real time. A 3.80 inch profile is designed to fit under furniture, and the robot crosses thresholds and door strips up to 2 cm on its own.

In the Roborock lineup, the QV 35S is the value path into fully hands-off vacuuming and mopping - a complete self-emptying, self-washing dock system without the price of the Qrevo and Saros flagships.

• 10,000 Pa HyperForce Suction: Strong enough to pull grit from hard-floor seams and pet hair from carpet pile, with automatic mop lifting so carpets are vacuumed dry.
• Dual Spinning Mops: Two mop pads spin at up to 200 RPM to scrub dried spills and footprints instead of just wiping them, with edge-to-edge coverage across the robot's path.
• Self-Cleaning Dock: After mopping, the dock washes the pads with hot water in a 3-stage dynamic cycle and air-dries them, so you are not rinsing mop cloths in the sink.
• Auto Dust Emptying and Refilling: The dock empties the robot's bin into a sealed bag on a schedule you control and tops up the robot's water tank automatically mid-job.
• Dual Anti-Tangle Brushes: A spiral all-rubber floating main brush and an arc-shaped side brush shed long hair and pet fur instead of winding it around the rollers.
• PreciSense LiDAR Navigation: 360-degree scanning builds accurate maps for up to 4 floors, with room-by-room cleaning, zones, and no-go areas managed in the Roborock app.
• Reactive Tech Obstacle Avoidance: Structured-light sensing spots shoes, cords, and clutter in the robot's path and routes around them in real time.
• Built To Fit Under Furniture: A 3.80 inch profile reaches under beds and sofas, and the robot climbs thresholds up to 2 cm between rooms.

The QV 35S suits homes that want true set-and-forget floor care: mixed hardwood, tile, and low-pile carpet, kitchens that need regular mopping, and pet households where hair volume defeats basic bins and tangle-prone brushes. Multi-floor mapping for up to 4 levels makes it practical in townhouses, and the 2 cm threshold crossing handles door strips and layered transitions without rescues.

Within the Roborock lineup, the QV 35S is the stronger-suction sibling of the QV 35A; step up to the Qrevo Curv for a flagship-grade dock and chassis, or down to the Q10 S5+ if you only need auto-emptying without mop washing.

1. Unbox and remove protectors: Strip the protective films and foam from the robot, mops, and dock, and clip in both spinning mop pads.
2. Place the dock: Set it on a hard, level floor against a wall near an outlet, with open floor in front and clearance on both sides for straight docking.
3. Fill the tanks: Fill the dock's clean water tank and confirm the dust bag and empty dirty-water tank are seated.
4. Charge: Dock the robot and let it charge fully before the first run.
5. Pair in the Roborock app: Download the Roborock app and pair the robot over 2.4 GHz Wi-Fi (5 GHz is not supported).
6. Run the first mapping cycle: Let PreciSense LiDAR map each floor you plan to clean - the robot stores up to 4 maps.
7. Set your routine: Name rooms, add schedules, no-go zones, and water flow settings, and choose how often the dock self-empties and washes the mops.