AIRSEEKERS TRON Robotic Lawn Mower 2400m²

The AIRSEEKERS TRON is a smart robotic lawn mower that cuts your grass for you, with no boundary wire to bury. It uses 300-degree AI vision together with Network RTK and VSLAM to see your yard, map it, and mow it in neat, straight lines from edge to edge. It works on lawns up to 2,400 square meters, or about 0.6 acre.

Instead of collecting clippings, the TRON uses its FlowCut system to cut the grass very finely and drop it back into the lawn as mulch. This feeds your lawn and means there is no bag to empty. A high-velocity fan lifts wet or flat grass so every blade gets cut. You can set the cutting height from 30 to 90 mm right in the app.

The TRON is built for real yards. Four large wheels with dual hub motors let it climb slopes up to 65 percent (33 degrees) and roll over rough ground without getting stuck. It is IPX6 waterproof, has a rain sensor, and drives back to its dock on its own when the battery runs low or it starts to rain.

• Wire-Free AI Vision: 300-degree AI vision plus Network RTK and VSLAM map your lawn and keep it on track, even in shaded spots. No boundary wire needed.
• FlowCut Mulching: Dual-layer blades and a fan cut grass finely and feed it back into the lawn, so there is no bag to empty.
• Handles Hills and Rough Ground: Four large wheels and dual hub motors climb slopes up to 65 percent (33 degrees).
• Smart Obstacle Safety: The AI vision spots and drives around toys, hoses, pets, and other objects.
• Swappable Battery: Pop in a fresh 15,000 mAh pack to keep mowing without waiting to recharge.
• Full App Control: Set up to 80 zones with their own schedules and heights, and see the mower's location on the map.

The TRON is made for home lawns up to about 0.6 acre, including yards that are hard to mow. Because it does not need a boundary wire, it is a good fit for lawns with curves, narrow paths, trees, and tight corners. It maps the whole yard and mows edge to edge.

It works well on hills and rough ground thanks to its big wheels and strong motors, and it can mow at night since it is quiet and uses vision to find its way. Once it is set up, you can leave it to keep your lawn neat on its own schedule.

1. Set up the dock: Place the charging station on flat, open ground with a clear 2 by 2 meter space in front.
2. Set up the RTK: Place the RTK base station in an open spot for a good signal. It can share power with the dock.
3. Charge the mower: Put the TRON in the dock and let it charge until the lights are solid green.
4. Connect the app: Turn on Bluetooth, join your Wi-Fi, then scan the codes on the mower and the RTK to pair.
5. Map your lawn: Drive the mower around your yard once in the app so it learns the boundaries. Add any no-go areas.
6. Start mowing: Set your cutting height, zones, and schedule, then let the TRON mow on its own.